BCTMH - FIBRED LAPPING CEMENT
- MSDS: BCTMH
- Manufacturer: GARDNER ASPHALT CORP
- Product Name: FIBRED LAPPING CEMENT
- National Stock Number: 5610-00N009885
Product Identification
Product ID:FIBRED LAPPING CEMENT
MSDS Date:01/10/1986
FSC:5610
NIIN:00N009885
MSDS Number: BCTMH
Responsible Party
TAMPA, FL 33605
Emergency Phone: 813-248-2101
Info Phone: 813-248-2101
Cage: 0VZ30
Contractor
Telephone: 800-237-1155/813-248-2101
Cage: 0VZ30
Ingredients
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: 35%
OSHA PEL 100 PPM
Hazards
LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS & SYMPTOMS OF OVEREXPOSURE.
Explanation of Carcinogenicity:N/A
Effects of Overexposure:IRRITATION OF EYES,SKIN AND RESPIRATORY SYSTEM.
Medical Cond Aggravated by Exposure:
First Aid
First Aid:EYE:FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES
.SKIN:WASH THOROUGHLY WITH SOAP & WARM WATER.INHAL:IRREGULAR OR
STOPPED BREATHIN-ADMINISTER OXYGEN,START RESUSCITATION.
Fire Fighting
Flash Point Method:PMCC
Flash Point:105F; 40.56C
Lower Limits:0.9%
Upper Limits:6.0%
Extinguishing Media:FOAM,DRY CHEMICAL,WATER,FOG SPRAY.
Fire Fighting Procedures:FIREMEN SHOULD WEAR SCBA TO PROTECT AGAINST
INHALATION OF COMBUSTION PRODUCT..
Unusual Fire/Explosion Hazard:KEEP WORK AREAS FREE OF SOURCES OF
IGNITION.COMBUSTIBLE MATERIAL.
Accidental Release
Spill Release Procedures:RECOVER AS MUCH LIQUID AS POSSIBLE.ABSORB
SPILL W/ DIATOMACEOUS EARTH OR OTHER SORBENT.ADVISE AUTHORITIES IF
PRODUCT HAS ENTERED OR MAY ENTER SEWERS OR WATERWAYS.
Neutralizing Agent:
Handling
Handling and Storage Precautions:AVOID EXPOSURE TO OPEN FLAME.CLOSE
CONTAINERS WHEN NOT IN USE.HAVE ADEQUATE VENTILATION.
Other Precautions:DO NOT HEAT CONTAINERS.AVOID PROLONGED OR REPEATED
CONTACT WITH SKIN.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST RECOMMENDED >50 FPM.USE EXPLOSION-PROOF
EQUIPMENT.HAVE ADEQUATE VENTILATION.NO SMOKING.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEM WORK GOGGLES FACESHLD OPTIONAL
Other Protective Equipment:USE CHEMICAL RESISTANT CLOTHING TO AVOID
SKIN CONTACT.
Work Hygienic Practices:OBSERVE GOOD WORK HYGIENIC PRACTICES
Supplemental Safety and Health
TLV:8HOUR WORKDAY:200 PPM PER SOLVENT,5MG/CUM,FOR ASPHALT FUME.
Chemical Properties
Boiling Pt:B.P. Text:300F;148C
Vapor Pres:<5
Vapor Density:>20
Spec Gravity:0.96
pH:
Evaporation Rate & Reference:0.08
Solubility in Water:INSOLUBLE
Appearance and Odor:
Percent Volatiles by Volume:35
Corrosion Rate:
Stability
Stability Indicator/Materials to Avoid:YES
OXIDANTS SUCH AS CHLORINE AND CONCENTRATED OXYGEN.
Stability Condition to Avoid:
Hazardous Decomposition Products:CARBON MONOXIDE AND SULPHUR OXIDES.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL,STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.